Marchesini M10RS Kompe Forged Aluminum Wheel Set Ducati 1098/1198/Multistrada/M1200
Thirty years’ experience in manufacturing in light alloy wheels and an enviable series of successes: Marchesini quality meets the needs, in terms of cost, of all bike enthusiasts.
The M10RS Kompe is a forged aluminum 10-spoke wheel with the distinctive Y shape that has become a classic over the years.
Loved and desired by generations of bike enthusiasts, the M10RS Kompe is an example of a perfect balance between technological content, aesthetic appeal and cost which is well in line with what most riders can afford.
The M10RS Kompe, available for all the main sport and supersport motorcycle models, are liquid painted in a wide variety of colors.
Average wheel weight with spacers and bearings:
Front Wheel- 8 lbs.
Rear Wheel- 9.5 lbs (Single Swingarm) 11 lbs. (Dual Swingarm)
- 17 inch x 6.00 inch Rear Wheel
- Uses OEM Cush Drive
- 10-Spoke design
- Multi Forged Aluminum
- Wheel set weighs 20.5 lbs. w/bearings, axle spacers, brake rotor spacers and sprocket carrier
- Rear/Front-Bearings, bushings, axle spacers and valves
Matte Black, Gloss Black and Gold
Streetfighter 1098 2009
1198 (all years and versions)
1098 (all years and versions)
Multistrada 1200 (all years and version)
1260 Multistrada 2018 - Current
1260 S Multistrada 2018 - Current
Multistrada 950 2017 - Current
Monster 1200 2014 - Current
Monster 1200 S 2014 - Current
Supersport 939 2017 - Current
Why use lightweight wheels?
- Carbon and titanium parts and bolts will lower the overall weight of your motorcycle and this is great for increasing total power to weight ratio. However, considering the tires, wheels and brake rotors have rotational mass, reducing this weight is directly felt by the rider and provides a tangible performance increase.
Moment of Inertia
- Construction of wheel- where is the weight? Cast OEM wheels are not only heavier, but the weight is not distributed the same as a carbon, magnesium, or forged aluminum wheels.
- The farther away weight is placed from its axis in a gyro (wheel), the more rotational inertia there will be. This is at an exponential level, with the increase of weight and distance from center axis. The more weight at the outer edges of a wheel, the harder it will be to turn, stop or accelerate.
- Aftermarket, high performance wheels are designed to have a minimal amount if this moment of inertia compared to the OEM cast aluminum wheels. A forged aluminum wheel for an example, is not only lighter in total weight but has the majority of that weight placed closer to the axles, thus reducing the moment of inertia.
- In simpler terms- lighter and well-engineered wheels: Saves power. = Accelerate quicker = Faster top speed = Faster lap times
- Rider fatigue is also reduced- lighter wheels stop quicker and enable less effort for turning into and exiting corners.
- Overall easier feel on the front end.
***Retuning suspension is recommended when changing to lightweight wheels from OEM