BikeSportDevelopments - Ducati V4R - 4 function brake pump mount - Stop/Run, DPL, Start, PIT

(No reviews yet) Write a Review
$330.00
SKU:
BD-SW-4BC-18
Availability:
Usually ships in 3 - 5 business days

 

 

BikeSportDevelopments (Type C) Ducati V4R right side 4 Function Race and Road Control Switch

$ 300.00 

Description:

  • The aluminium assembly has been designed specifically for the V4 with ‘plug n play’ connectors and ergonomic adjustable mounts direct to the brake pump. Red , Stop/Run Black , DPL (launch) Green , Starter PIT speed.
  • No modification of the bike wiring is necessary, this kit plugs directly into the connector of the standard loom.
  • We have created a right switch for the Ducati V4R with 4 functions to include the PIT.
  • Mounting is our ‘Type C ‘ design directly onto the brake pump via a new clamp.

Mounting:

These ‘Type C’ switches mount directly onto the provided clutch master cylinder clamp, replacing the original part. All are fully adjustable left / right to suit the rider. As standard we supply one clamp free of charge per switch to suit the standard bike but you are free to choose any alternative clamp to suit your bike at the time of ordering.

Mount Spacing: ***BR-A is provided as default for this switch

BR-A 32mm in-line bolt spacing Panigale Brembo OEM Front Brake Master Cylinder or Brembo Radial Master Cylinders

BR-B 30mm offset bolt spacing for Brembo Billet Racing Brake Master Cylinder XR01171 

BR-N 32mm in-line with a left offset for short brake levers or Nissan Radial Brake Master Cylinders

BR-F 30mm in-line as found on Accossato Radial Brake Master Cylinders

*Additional Clutch side clamps are $ 70.00 each

Electrical connection:

No modification of the bike wiring is necessary, this kit plugs directly into the connectors of the bike

Specifications:

  • Wire Type- 55 / 24
  • Switch sealing- IP67
  • Housing- Aluminum
  • Coating- Black anodized
  • Max Width- 20.5mm
  • Min Width at Center-20.0mm
  • Diameter (handlebar)- 22mm (7/8”)
  • Weight- 85 grams

About BikeSportDevelopments

Bike Sport Developments create and manufacture race style switch pods for both street and track motorbike use. Our emphasis is always on quality coupled with ease of installation via our ‘Plug n Play’ connections and detailed product data sheets. Our products are all backed up by accessible tech support and parts repair.

Handlebar Switches These products had humble beginnings as the first five made were simply to integrate with a Marelli system on a Bike Sport Developments project MV F4 we were working on. A customer who saw the project bike asked if we could make a few more, and then it spiralled from there to the point where we now make ‘Plug n Play’ switches for pretty much every brand of bike.

The desire to keep the range of switches fresh and up to date means that even the latest bikes with processor controller switch sets and coded interface with the ECU, can still be replaced by ‘Plug n Play’ Bike Sport Developments products.

 

(No reviews yet) Write a Review