Accossato 19x20 Radial Clutch Master Cylinder w/ Folding Lever RST
Loved by racers worldwide, the Accossato 19x20 radial clutch master cylinder for sportbikes feature a folding, standard length RST lever with anti-drag inlet hole. The forged aluminum cylinder is stronger and lighter than stock cast units for maximum reliability. Accossato has been producing Italian made sportbike components for original and aftermarket use since 1969.
This hydraulic clutch master uses a 20mm diameter piston and a upgraded racers folding, standard length RST lever which features an anti-drag inlet hole machined into the lever end for the passage of air at high speed.
Accossato produces race quality clutch master cylinders and braking components using a 100% quality-control process mandating all core components to be inspected under a microscope before assembly, pressure calibrated, and vacuum tested upon final assembly.
Folding Lever: 19x20
Material: Pressure Forged Aluminum
Surface Protection: Anodized
Standard Folding Lever w/ RST Part#: ACC-LV006N-20-L-RST
Short Folding Lever Part#: ACC-LV006N-20-C
Exclusive Three (3) Year Limited USA Warranty
Items Required to Complete Installation
Accossato 15ml Brake Reservoir Mounting Kit (Part# ACC-KITVP) as it includes a reservoir, bracket, hardware and tubing.
15ml Fluid Reservoir
Hose Clamp (x2)
Aluminum Support Bracket
Do NOT use DOT 5.1 Brake Fluid
If you intend to use your stock reservoir you will require a length of 6mm Tygon 2375 Tubing and 2 3/8" Spring Clamps.
Dot 4 Brake fluid will be needed. We suggest replacing all of the fluid in the system when you install the master. Do NOT use Dot 5.1